Oval Track 30 Series Shocks

30 5325 - 5 inch stroke shock

30 5325|5in stroke|3 Bump|2-5 Rebound|10.75in Min Length|15.75in Max Length

30 5436 - 5 inch stroke shock

30 5436|5in stroke|4 Bump|3-6 Rebound|10.75in Min Length|15.75in Max Length

30 6325 - 6 inch stroke shock

30 6325|6in stroke|3 Bump|2-5 Rebound|12.25in Min Length|18.25in Max Length

30 6436 - 6 inch stroke shock

30 6436|6in stroke|4 Bump|3-6 Rebound|12.25in Min Length|18.25in Max Length

30 7325 - 7 inch stroke shock

30 7325|7in stroke|3 Bump|2-5 Rebound|12.75in Min Length|19.75in Max Length

30 7436 - 7 inch stroke shock

30 7436|7in stroke|4 Bump|3-6 Rebound|12.75in Min Length|19.75in Max Length

30 7647SP1 - 7 inch stroke shock

30 7647SP1|7in stroke|6 Bump|4-7 Rebound|12.75in Min Length|19.75in Max Length

30 9325 - 9 inch stroke shock

30 9325|9in stroke|3 Bump|2-5 Rebound|14.75in Min Length|23.75in Max Length

30 9436 - 9 inch stroke shock

30 9436|9in stroke|4 Bump|3-6 Rebound|14.75in Min Length|23.75in Max Length



How to Adjust
Technical Information - Tuning Guide

Description
Our 30 series shock is a single adjustable mono-tube design that can be used on Asphalt or Dirt Applications. There are four distinct rebound adjustments that allow you to adjust the shock to suit your needs, chassis setup and track conditions. The compression forces are pre-set. It is lightweight, very consistent and affordable.

This design offers a wide rage of valving options to fit a variety of applications at an economical price. The 30 series dampers are available with a variety of valvings to meet your specific damping requirements and can be utilized with a coil-over kit if necessary. Attachments are 1/2" ID bearing on both ends. The 30 Series can be run inverted to reduce unsprung weight.


Downloads
Force Chart for 30-series shocks
Conversion chart for old 30-13xx part numbers

For Coil-Over hardware kits and components click here.