General Precaution - Do not place
the piston rod in a vice, nor cause damage to the rod surface.
Figure 3: Do not place the shock absorber in a vise (except at
the lower eye)
Figure 1: Move pin left or right to increase rebound forces (counter-clockwise)
Rebound - Insert a pin into the slotted adjuster located at
the top eye (figure 1). Moving the pin from left to right (counterclockwise)
will cause the forces to increase. From the minimum or factory positions,
there are 12 possible sweeps of adjustment ( 1 sweep equals 1/4 turn).
